Z1 Off-Road 6x114.3 Bolt-On Wheel Spacers

Fit and finish is very nice... I would have them on already but needed deeper lug nuts as the studs are too long for my stock lugs

Better than anything universal you can buy and torqued to spec, I have not had an issue with the one inch. Peace of mind is there. Which, if you want to avoid any rubbing with stock tire size. You need to stay at 1 inch and remove front muds ... As I believe 1.5" and over will create rub on the third gen without melt mods at least. Great build quality as we have come to expect.

Shipping was fast and arrived in perfect condition. Easy installation and fit as they should. Another high quality product from Z1.

I installed 4 of the 1 inch spacers on my 2023 PRO4X early in the year and I use the OEM wheels with the 265 70 17 tire size and stock height. I had to do some mild trim on the front OE mud flaps, I cut the middle hump out to clear the tire slight rub. This 1 inch spacer adds a nice look to my P4X and the quality is great, so is the finish.

Fits perfectly, securely attached, no additional hardware necessary and aesthetically pleasing, no regrets

Look great and have held up to everything we have done even on 35s.

Gave the truck a much better looking stance with stock wheels. There will be some rubbing in the fender when turning so modification is required.

on my 24 Frontier with all terrian tires (17) the have a slight rub on the mudflap. i have clipped and all's well

Hub centric are the way to go, especially when installing a BBK with 18 inch wheels.

Easy install and they make the truck look great! I don't have a lift yet so they do cause some rubbing and had to remove front mud flaps and do some heat gun manipulation of the inner fender wall.

Wheel spacers fit great!

Great quality as with all Z1 products. These gave me the perfect spacing for the rear to match my Titan Swapped Xterra front track width.

Great quality, worth the price. Went with the 2” spacers, some rubbing at about full lock

These 1 inch spacers will slightly rub on the inside middle section of your mud flap in stock form without a lift. I put them on 2 days before I did the All dogs offroad RcKilla 2 inch front springs and 1.5 inch AAL in rear. No rubbing after lift was installed. This is the perfect spacer size imo on these gen 3 frontiers. Not too aggressive and only puts the tire about a qtr inch outside of the wheelwell, about perfect with the outside of the mud flaps. Quality spacer for sure. Well built. No vibration. Torqued to about 95-100 lbs ft. Used blue instead of red loctite so if I need to ever take them off I don't have to get a hernia trying to remove the lugs. Checked after 200 miles and we're still on nice and tight. Comes with everything you need. Direct bolt on.

Great spacers never had an issue on my 06 xterra

Bought these spacers to use for my rear 14' Xterra Pro-4X, since I'm planning on T-swapping it in the near future. Love the color, making them lowkey.

1” wheel spacers with stock wheels on the pro 4X made all the difference on the stance of this truck

The 1.5" spacers definitely caused major rubbing with stock tires on the 23 Frontier. I believe the 1" would have avoided this. I cut out some plastic, removed the mud flaps and bent and cut some metal to make them work. Happy with them but it would have been good to know about rubbing being an issue before selecting this size.

well made and fit nice but 1.5 in makes my wheels scrub, with stock rims n tires, wish i newe this before

These allowed me to keep my factory midnight edition wheels that I really like and still pit larger tires and a six inch lift with no rubbing.

I installed the 2 inch wheel spacers option on my 2011 Xterra back in mid August of 2022 and I am extremely satisfied with the results. These wheel spacers have that high-quality Z1 quality that provides noticeable improvements in both the appearance and handling of my Xterra. The installation process was straightforward and easy, thanks to the clear instructions provided by Z1. The spacers fit perfectly on my Xterra's wheels and the included hardware made installation a breeze. The build quality of the spacers is excellent, with high-quality materials and solid construction. The added 2 inches of width provides more stability while daily driving and while off-roading making the Xterra feel more planted and secure. The appearance improvements are also notable, with the wider stance giving the vehicle a more aggressive and off-road look. It also allows for larger tires I ordered back when I ordered these spacers to be installed, giving my Xterra a more off-road capable stance. I appreciate that the wheel spacers are hub-centric, which allows for a more secure and precise fit than other types of spacers. This ensures that there is no vibration or wobbling when driving at higher speeds, which gives me added peace of mind when on the road. I highly recommend the Z1 Off-Road 6x114.3 Bolt-On Inch Wheel Spacers for anyone looking to improve the appearance and handling of their Nissan Xterra. The high-quality build and noticeable improvements while driving and aggressive appearance for your tires when installed make these wheel spacers a great investment for any off-road enthusiast.

Great customer service, very quick shipping, and awesome product.

Worth the money. Better than the cheap ebay stuff.

These spacers are great, very well made, great quality.

These work great when torqued correctly. Definitely give the Xterra a nice stance and definitely improve your vehicles body roll significantly with the wider track you get.

Worked exactly like they were supposed to.

Several months in now from installing these and they’re AWESOME! Performs well and the 1” bump out gives it a slightly more aggressive look. Love them!

5 stars is my initial review of these spacers. Quality looked good and I haven’t experienced any vibrations so far. Definitely gives the truck a much better stance.

Works well for my Titan Swap