Dobinsons Front MRR Standard Length 3-Way Adjustable Shocks with for 2005-2021 Nissan Frontier (D40) and 2005-2015 Nissan Xterra (N50) models.

Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, Dobinsons 4×4 shock absorbers are designed and tested to perform in the harshest conditions right across the world. They export to over 40 countries worldwide from their Australian head office. The importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter. Their MRR Shock Absorbers are made from the world’s highest quality external and internal parts sourced worldwide. They provide a significant increase in performance over the standard shock absorbers. Originally equipped shock absorbers are prone to shock fade and when a vehicle is loaded simply cannot cope with the additional weight and the harsh condition that 4X4 owners love to put them through. Their MRR shock absorbers feature larger bodies, larger bores and increased valving performance to dramatically improve vehicle handling and control and reduces shock fade.

Note: Complete the kit with Dobinsons MRR 3-Way Adjustable Rear Shocks located HERE.

Features:

• Lift Range: 2-2.5inches (depending on spring and weight of vehicle)
• Three Spring Options: Stock Load, +110lb Load, +220lb Load
• 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you
• 10 Stage High Speed Compression - For aggressive, high speed off roading through ruts and holes
• 20 Stage Low Speed Compression - For creepy crawling and cornering
• 15 Stage Rebound - Control your coils, prevent bucking
• 50mm CNC Machined High Flow Billet Aluminum Race Piston
• 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
• Upgraded 3 Stage Fluorocarbon HNBR Sealing System
• TSUGAMITM CNC machined components for precise tolerances
• ParkerTM Braided High Pressure Hoses
• 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
• T6 6061 Height Adjustable Spring Seat
• Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low?wear performance
• 60mm Full 6063 aluminum remote reservoir
• Lightweight CNC Machined Low Friction floating piston
• High Quality O.E.M. Grade Natural Rubber Bushings
• Single Piece Lower Leg
• EDP Surface Protection
• Direct Bolt-On Design
• CNC TIG Precision Welded Body End Mounts
• Fully Rebuildable Design
• Max Adjustable Length from center of lower eyelet to bottom of shock perch - 106mm

Note: This measurement must not be exceeded as this may cause the coil spring to bind and will cause serious damage to the shock absorber, the spring and also the vehicle. A minimum of 50mm of downward wheel travel must always be maintained. 

**MRR Installation / Fitting Instructions**

**Front Strut Assembly Instructions**

Sold as a Pair.

Fits:

• 2005+ Nissan Frontier (D40, D41) 
• 2005-2010 Nissan Pathfinder (R51)
• 2005-2015 Nissan Xterra (N50)