Product Description
Upgrade the rear axles and wheel bearings on your Nissan 350Z or Infiniti G35 with the updated 370Z parts provided here!
On the 350Z and G35, the rear wheel bearings are failure prone and require the entire hub assembly be pressed off of the existing bearing and reused (or replaced at a high cost) to install. 370Z wheel bearings are a much better, much beefier piece and are sold as a single pre-assembled unit. When they fail replacement can be done in the driveway or at the race track without the need for special tools. Additionally, 370Z axles are a fair bit stronger than your 350Z or G35's tired original axles making them a ideal candidate for replacement when your axles finally fail.
Neither of these parts can be installed independently but they work together like peanut butter and jelly! Installation is easy, when installed together these rear wheel bearings and hub assemblies require absolutely no assembly or modifications to either the parts or car. Simply uninstall your worn out parts and install your new updated axles and bearings.
Includes:
Fits:
- 2003-2008 Nissan 350Z
- 2003-2006 Infiniti G35 Sedan
- 2003-2007 Infiniti G35 Coupe
Fitment Note: If you have a 2007-2008 G35 Sedan, congratulations! You already have these awesome bearings and axles on your car. If they're worn out, you can buy this kit and save yourself a little money for other mods. If you're looking for an upgrade take that money you were about to spend and go grab yourself a milkshake, then snag some Driveshaft Shop Axles.
*** This item does not qualify for any additional discounts or promotions *** |
 |
Z1 Motorsports Zino Air Freshener
starstarstarstarstar_half (68)
$4
Red Line 75W90 Differential Fluid - 1qt
starstarstarstarstar (25)
$23.53
Z1 Polarized Zino Sunglasses
starstarstarstarstar (8)
$9.99
OEM Nissan Fluid Gasket (RTV)
starstarstarstarstar_half (37)
$11.54
Z1 Brake Bleeder Cap
starstarstarstarstar_half (34)
$2.99
Motul RBF 600 Brake Fluid
starstarstarstarstar_half (15)
$20.46
OEM Nissan / Infiniti Axle Nut Cotter Pin
starstarstarstarstar (7)
$0.88
Z1 Frontier / Pathfinder / Xterra Front Strut Mount Kit
starstarstarstarstar_half (8)
$26.99
Nissan Frontier HD Eccentric Bolts by Z1 Off-Road
starstarstarstarstar_half (5)
$44.99
OEM Wheel Bearing Hub to Knuckle Bolt
starstarstarstarstar (2)
$2.95
Nissan Frontier Offset Eccentric Bolt Lock-Out Kit by Z1 Off-Road
starstarstarstarstar (7)
$54.99
OEM Nissan Xterra / Frontier Rear Wheel Bearing O-Ring Seal - C200
starstarstarstarstar (1)
$8.88
starstarstarstarstar_border
Grant
November 23, 2024
Haven’t finished the install yet, but the upgrade to axles and better bearings looks way higher quality over the stock setup. Only complaint is the hardware that came with kit. The bolts may be hardened but the washers and nuts are definitely not. Washers spun out and nuts rounded off when torquing. Replaced all hardware and seems good
starstarstarstarstar_border
Steven
July 22, 2024
Great all in one replacement for your 350Z bearings,hub and axle. makes it a never have to do again job for a spirited daily driver like mine.
I DO NOT LIKE THE THUD it creates when you go from reverse to forward and vice versa.(spline play) reminds me of the TSB Nissan had with its axles.
That being said, if it they stronger than OEM and create a long lasting all in one solution then I think made the right choice.
starstarstarstarstar
Paul
June 13, 2024
starstarstarstarstar
Brian
February 16, 2024
quite stout compared to oem pieces. really gives me confidence in the durability. thrilled with the quality and outcome. a genuine piece of mind
starstarstarstarstar
Mike
February 12, 2024
Perfect upgrade to the stock axles on an '03 G35
starstar_borderstar_borderstar_borderstar_border
Grant
January 17, 2024
Drivers side shaft broke with only about 5000 miles on it. No track days or hard driving on it. Disappointing that stock g35 shafts lasted 15 years and 160,000 miles but these fail after 2 years and 5,000 miles??
starstarstarstarstar
Gordon
January 16, 2024
Perfect kit for "while I'm in there" rear drivetrain upgrades! I popped off the seals and cleaned out the amber stuff and repacked them with some Redline CV2 high moly grease, haven't had a problem with them after many hours of trackday time.
starstarstarstarstar
Vincent
December 19, 2023
Felt like I had a whole new car with this mod. Bought the front wheel assemblies as well and went easy for the first 100 miles to gently break them in. Highly recommended.
starstarstarstarstar
Thomas
October 14, 2023
Awesome beefy upgrade to drive train! with the addition of rear diff cover, diff bushings, diff support, and air bushing collar inserts, Really stiffened up the rear end and put the power to the ground where it needs to be.
starstarstarstarstar
Ethen
July 8, 2023
starstarstarstarstar
Brendan
June 13, 2023
starstarstarstarstar
Timothy
May 31, 2023
Fits perfectly, Much beefier than the OE bearing and axle. Also all the provided bolts fit perfectly for my FDF Axle spacers so that was a huge plus.
starstarstarstarstar
Vilém
April 15, 2023
Montáž proběhla úplně hladce. Vše pěkně pasovalo.
starstarstarstarstar
Cody
November 24, 2022
Great package deal, been running this for 2 years and it's night and day difference from Oem.
starstarstarstarstar
Grant
October 17, 2022
Was very pleased to find out it actually IS a straight swap apart from requiring slightly longer bolts to secure to the diff , which is not a problem . After doing plenty of track days ,daily driving and some touring i am very happy with this upgrade . NOTE i would highly recommend a copper based anti seize grease to prevent Clicking when reversing , normal HT grease just will not continue to work . I used LOCTITE LB 8008 . Hope this helps .
starstarstarstarstar
Brandan
May 23, 2022
As long as you can get your old ones out, these will go in perfectly. Been driving on them for about 20k miles with no problems
starstarstarstarstar
Roman
April 29, 2022
Fit perfectly and had all needed parts and bolts included.
starstarstarstarstar
Takoda
April 23, 2022
Axles are good so far. No clicking when turning like the original hubs and axles.
starstarstarstarstar
Mauro
December 18, 2021
Pretty straightforward bolt on and replacement, only thing they should know and mention is that you have to swap sides when putting the new axles. The new passenger side axle should go on the drivers side of the z33 and vise versa for the other axle as well.
starstarstarstarstar
Randall
December 8, 2021
Great value. Easy to install and no more damaged bearing sound! Excellent!
starstarstarstarstar
William
November 16, 2021
I purchased this Rear Axle and Wheel Bearing Upgrade Kit for my 2004 350Z with 148,560 miles. I absolutely love this upgrade kit! I had the installation done by Nissan, and witnessed it. My mechanic stated it was a very easy install with all hardware being provided with the kit. Much more beefier than my stock 350Z rear axle & bearings. My axle was fine and only the bearings were starting to fail. Since I had never replaced them and current mileage, I decided on the full kit. Definitely recommend this if you ever need to replace your wheel bearings!
Ruff…
starstarstarstarstar
Nikko
October 10, 2021
Installation was pretty cut and dry. However, there should be a note in the description that the axles go on opposite sides. The left 370z axle will not fit on the left side of the 350z.
starstarstarstarstar
Jayden
August 28, 2021
Fit amazing and I would recommend this to every z owner. Plug and play!
starstarstarstarstar
Roger
June 13, 2021
This has been a awesome upgrade for me. The axle and wheel bearings have been great just wish I would have read more to I could have seen that I needed longer hardware or that the kit came with longer hardware but besides that it was perfect
starstarstarstarstar
ANTHONY
May 17, 2021
starstarstarstarstar
Jay
May 16, 2021
My stock axles and rear wheel bearings were shot, so I decided it was time for an upgrade and instead of going back to stock or buying aftermarket parts Z1 carried the perfect bundle/upgrade for my Z. They bolt right up and give you no issues! 10/10 would buy again
starstarstarstarstar_border
Terrance
May 11, 2021
Great quality, straight forward install, the only issue is ur going to need longer hardware because the new axle flanges are thicker I would highly recommend this upgrade as the OE axle bearings are not very durable.
starstarstarstarstar
Anthony
April 26, 2021
It was a good choice to upgrade but the kit should come with longer bolts for the diff and axle flange. Oem bolts are a bit short but overall it was easy plug n play !
starstarstarstarstar
Bud
January 26, 2021
This product worked perfectly, no vibrations or noises.
Thank you
starstarstarstarstar
Victor
January 25, 2021
This is a good UPGRADE way more beefier looks more durable...
starstarstarstarstar
Wesley
May 14, 2020
Great easy upgrade. Simple install, much improved design. Had a wheel bearing going out so it only made since to upgrade.
starstarstarstarstar
Wesley
May 14, 2020
Great easy upgrade. Simple install, much improved design. Had a wheel bearing going out so it only made since to upgrade.
starstarstarstarstar
Benjamin
March 28, 2020
Was looking for wheel bearings for my 2004 G35 coupe and came across this package. One of the best purchases I've ever made my car drive super smooth and quite. 370 parts on a old G35 is a no brainer. Took about most of the afternoon to get them installed (6/10 difficulty) hardest part was getting the axle nut off mine was stripped so we had to grind it off. Other than that its pretty straight forward. 100% worth it.
starstarstarstarstar
Pablo
July 12, 2019
First and for most this is a direct bolt on upgrade. All oem hardware fits right back into place no need to pull up to the local hardware store making this hassle free as can be.
TOOLS REQUIRED:
14mm wrench
14mm deep socket
17mm socket
19mm socket
1/2 in. 3 inch extension
1/2 in. 6 inch extension
1/2 in. Socket wrench
1/2 in. Breaker bar
1/2 in Impact wrench
My rear driver side bearing was completely wasted. Once I removed the old driver side rear axle it disintegrated!! The overall removal and install on both sides was a breeze. It took me about an hour on both sides.
This is all bang for its buck. My 04 G35 vq35de coupe drives on a cloud. 370z parts on a g35? I’ll take it!! I HIGHLY RECOMMEND THIS UPGRADE!!!!
starstarstarstar_borderstar_border
Ryan
July 9, 2019
Overall pretty good quality parts.
Downside with my 2003 350z, the oem axle bolts that hold them to the differential aren't long enough due to the thicker flanges on the axles so new longer bolts will need to be sourced to use, hence the rating.
ASRIUBNFAIURNFKAJSNFLAKJSDNFLKASNDFLKASDNMFALKSNDFOANEF