Old Man Emu leaf springs are engineered to provide optimum ride performance irrespective of the operating conditions in which they operate. Numerous spring options are available to suit a multitude of applications, allowing you to set your vehicle up for recreational or commercial purposes. Feature packed, a set of Old Man Emu leaf springs, matched to a set of Old Man Emu 4X4 shock absorbers will deliver vastly improved ride, handling and load carrying capability.

Features:

• +1.5" lift for standard weight applications.
• Draw-tapered and diamond cut leaves ensure the load is progressively distributed over a larger surface area, reducing the high stresses that develop at leaf ends, increasing ride comfort and longevity
• Leaf clamps are bolted to allow installation of anti-squeak nylon liners
• Fully scragged to ensure the spring takes a permanent set which reduces the risk of sagging
• Load testing ensures the spring meets the required specification
• Re-greasable nylon interleaf anti-friction pads reduce friction at the leaf tips where the load is the greatest
• Flat axle seat area allows a positive, safe axle mount reducing spring stress and increasing spring life
• The tension side of all leaves is shot peened to reduce spring stress. This process can double the life of a spring
• Two-stage leaf pack featured on most rear springs for optimum comfort. When unladen, the vehicle is largely riding on the primary stage, with the secondary stage providing additional support when a heavy load is added  

Part Number: CS061R

• Gain more adjustability and lift with the exclusive Nissan Xterra Adjustable Rear Lift Shackles by Z1 Off-Road
• Leaf Spring Bushings are available separately HERE.
• Additional lift or load support for these springs are available with the ARB add a leaf available HERE.
• It is recommended to pair these with the ARB / OME Xterra U-Bolt (Available HERE) as the OEM u-bolts are not long enough; 4 required per assembly.

Bushings and Hardware sold separately.

Fits:

• 2005-2015 Nissan Xterra

DISCLAIMER: Leaf springs are shipped and handled in bulk and we consider them to have a "trail-ready" finish. Meaning the finish is not perfect and may have some scratches and other small blemishes that do not affect performance. If you would like the finish on the leafs to be flawless, then we recommend a DIY method such as painting them before installation. The image below is how leaf springs are shipped from Z1.